Directions for Use

FW1 Cleaning Wax

  1. Spray on a light coat of FW1 on a small selection.
  2. Using a dry FW1 Terry Towel gently rub FW1 in a circular motion.
  3. Using a dry FW1 Microfibre Cloth LIGHTLY buff to a showroom shine.

TIPS

  1. Shake can well before each use.
  2. Wash off excess dirt.
  3. Do not spray on hot surfaces.
  4. Use in a shaded area.

Super Can Sprayer

TO INSTALL

  1. On a stable surface, rotate the can to have the spray tip of the nozzle face away from you and through the “nose” of the Super Can Sprayer. Place the nose down inside the valve mounting cup.
  2. Keeping your finger OFF the trigger, with a continuous motion press forward and down on the Super Can Sprayer until the unit is firmly in place inside the valve mounting cup.
  3. Pull the trigger to spray.

TO REMOVE

  1. Hold can firmly in one hand and grasp the Super Can Sprayer in the other. Push the bottom of the handle towards the bottom of the can.
  2. Clean if necessary and reuse at anytime.

TS2 Touchless Tyre Shine

  1. Spray on
  2. Allow to dry
  3. Do NOT use on hot surfaces
  4. Shake can well before each use (20 - 30 seconds)
  5. Low sling formula
  6. Use on dry tyres only

GP3 - General Purpose Cleaner

  1. Spray on
  2. Wipe clean
  3. Do NOT use on hot surfaces
  4. Shake can well before each use (20 - 30 seconds)

CU4 – Carpet and Upholstery Cleaner

  1. Remove all items from area to be cleaned
  2. Vacuum area completely
  3. Spray CU4 in a light coat directly on to the area
  4. Using a damp Terry Towel, wipe down the area in a sweeping motion
  5. Using a dry Terry Towel, wipe away any excess dirt